Roll Trac System
Before ordering your Roll Trac System, determine the precise area
to be inclosed, the number of sides and dividing panels needed,
and the height of the curtain or curtains required. You will want
to consider the possibility of rounded corners, which may be traversed
by the curtain, or curtain-stopping right angles.
Check the six suspension techniques that follow and determine which
best suits your requirements.
 |
Beam or Chain Support Mount
Attaches to a beam or any member immediately above the top level
of the curtain. May be used with round or right angle corners. |
 |
Ceiling Mount
Attaches directly to ceiling or any flat horizontal surface
directly above the curtain. May be used with round or right
angle corners. |
 |
Floor Column (Free Standing)
Permits erection of screens in any area. Base and tube assembly
may be used with round or right angle corners.
Call for pricing. Not included in standard pricing. |
 |
Threaded Rod Bracket
For use when there are no easily accessible structures near
the track. Threaded rod attaches to the ceiling height significantly
above the track system.
Bracket is included in standard
pricing – Threaded
rod not included. |
 |
Wall Mount
Attaches to walls or any vertical surface. May be used with
other mounting techniques. |
 |
Beam Flange Connectors
Permits attachment of roof truss section, beams, and channels.
Secured with edge clamps and set screws. Clamps can be rotated
for proper alignment. Call for
pricing. Not included in standard pricing. |
Nylon roller with 1/2" hook |
Roller track |
Radius Curved Tack with Plain Connectors
If
you want your curtain wall to turn a corner, you will need
to order a 24" radius
corner for each corner. There is an extra $65 charge per
radius corner.
How to Measure for Radius Corner
The radius corner extends two feet in each direction.
|
Return to Curtain Walls
|
